The DDS SyncBell Clock System is a network clock system that offers the ability to centralize and synchronize clocks via local ethernet network to ensure reliable and accurate timekeeping throughout the facility. The network automatically updates for Daylight Savings Time changes and includes a secure Linux-based web interface to set up and monitor through the master clock. No internet access or software is needed to operate the system. Various display add-ons and setup options allow system flexibility for each situation.
Shop
SBELL Packages
SyncBell Controller & Bell
SBELL-CTR-BELL
SyncBell Master Clock & Bell
SBELL-40-BELL
SyncBell Master Clock & Bell
with 2 NTP Secondary Clocks
SBELL-40-BELL-2
SyncBell Master Clock & Bell
with 4 NTP Secondary Clocks
SBELL-40-BELL-4
About us
Features
Easy to Update & Synchronize
Synchronize time, date, timers, and bell schedule all throughout the facility with just one Syncbell master clock. All times are automatically updated for daylight savings.
No Software or Subscriptions
The SyncBell clock system requires no software installation or recurring subscription fees. The IP-based web interface is built directly into the clock, accessible through USB or Ethernet connection.
Build a Custom Clock System
Build upon the existing SBELL packages by adding any DDS clock to the network. This includes PoE ethernet clocks, time zone clocks, calendar clocks.
Made in the USA
All SyncBell clocks are manufactured and assembled in the USA, right in the center of Silicon Valley, but we ship clocks nationwide.
View and manage all clocks in the SyncBell clock system via the master clock’s reserved IP address on any computer browser when devices are connected to the same subnetwork. MSTR devices are preloaded with a secure Linux-based interface and require no software installation.
Built-in fail safe allows access to secondary clocks if the master clock is offline.
